สินค้าใหม่ (67)

ID : 123806
Brand : SIEMENS
Model : PPM-1U32.BPF
Last Update : 20/04/2559 11:00 Preview : 2,416
The Siemens Point Pickup Modules (PPM) are expansion I/O devices that communicate on a BACnet master-slave/token-passing (MS/TP) network, allowing for the incorporation of a cluster of remote points into the Building Automation Station over the MS/TP network. The PPM family leverages the MS/TP network to extend the reach of any BTL-listed BACnet Building Controllers application program. Each Universal Input can be configured for analog or digital input. Input/Output type is configured by writing to BACnet object properties.
ID : 127559
Brand : BELIMO
Model : H6..W..S7
Last Update : 29/09/2559 14:12 Preview : 1,795
Globe valve, 2-way, Flange, PN 16 • For closed cold and warm water systems • For water-side modulating control of air-handling and heating systems
ID : 127560
Brand : BELIMO
Last Update : 29/09/2559 14:11 Preview : 1,666
GV12-24-SR-T Large stroke actuator for 2-way and 3-way large globe valves DN 200 / DN 250 • Actuating force 12 kN • Nominal voltage AC/DC 24 V • Control: modulating DC 0 ... 10 V
ID : 127693
Brand : Dwyer
Model : WD
Last Update : 09/09/2559 14:20 Preview : 1,754
The SERIES WD Water Detectors and Sensor Tapes is designed for dependable detection of water presence even of low conductive liquids. The water sensing tape attaches to module and if any liquid comes in contact with the tape the resistance is changed and the alarm will be triggered. The sensing tape is 1˝ wide and can be bought in lengths of 5, 10, 15 and 25´ and is powered by 24 VAC or 24 to 30 VDC.
ID : 127836
Brand : Dwyer
Model : PHO-1
Last Update : 04/10/2559 11:31 Preview : 1,804
The microprocessor based pH/ORP/Temperature Meter offers quick response and high accuracy. Simultaneously measure and display pH from 0 to 14 pH (0 to 1999 mV) and temperatures up to 200°F (100°C). Model PHO-1 meter features manual or automatic temperature compensation, auto buffer recognition, and data logging capabilities, and the recording interval can be defined by the user. The Model PHO-1 accepts any pH electrode with a BNC connector. For additional convenience, select model PHO-1K kit, which contains a meter, RS-232 cable, batteries, software, pH electrode, temperature probe, gender changer, carrying case and manual.
ID : 128215
Brand : Huba
Model : ( Type 699 )
Last Update : 09/09/2559 14:15 Preview : 1,822
Relative, and differential pressure transmitter type 699 Pressure range -1 ... 1 mbar / 0 ... 0.3 - 50 mbar
ID : 128898
Brand : BELIMO
Model : FM
Last Update : 28/09/2559 13:00 Preview : 1,571
The Ultrasonic Flow Sensor is constructed with a flow tube , two ultrasound transmitters and an electronic device. The electronic device is based on Application-Specific Integrated Circuit (ASIC) to perform the ultrasonic time-of-flight measurement between the two ultrasound transmitters. A temperature sensor is placed in the flow tube to compensate temperature effects.
ID : 129184
Brand : REGIN
Model : OPTIGO
Last Update : 24/02/2559 11:16 Preview : 1,403
The controller for simple applications Optigo is a series of compact, economic and versatile stand-alone controllers. They are pre-programmed and intended for smaller applications. The controllers are extremely easy to install, commission and control.
ID : 129186
Brand : REGIN
Model : TTC..
Last Update : 05/10/2559 09:28 Preview : 1,423
For control of electric heating coils or radiators. The controllers pulse the whole load on/off and utilise time-proportional triac control. Automatic control function adaptation, P- or PI-control. The controllers can also be controlled by an external 0...10 V DC signal.
ID : 129541
Brand : REGIN
Model : TG-KH...
Last Update : 09/09/2559 14:24 Preview : 1,706
Duct sensor for air temperature measurement in ventilation ducts.
ID : 129548
Brand : REGIN
Model : C..
Last Update : 07/03/2559 15:43 Preview : 1,503
The EXOcompact controllers are perfect for stand-alone applications, e.g. zone control, control of heating and air handling units, as well as for system integration. They have a powerful processor and are available in three sizes with 8, 15 or 28 I/Os, with or without display.
ID : 129558
Brand : REGIN
Last Update : 09/09/2559 15:18 Preview : 1,668
Duct sensor for air temperature measurement in ventilation ducts. Adjustable insertion length.
ID : 129562
Brand : REGIN
Model : TRTC5-D
Last Update : 09/09/2559 15:17 Preview : 1,542
Short facts about TRTC5(-D) • Output signal Modbus • Temperature, 0...50°C • Good long-term stability • Modbus communication
ID : 129802
Brand : Dwyer
Model : MN-1
Last Update : 04/10/2559 11:44 Preview : 1,680
Converts RS-485 to USB, Integral USB Connector, No External Power
ID : 130578
Brand : Thermobreak
Model : Thermobreak Tube
Last Update : 30/03/2559 15:50 Preview : 1,519
Premium performance pipe insulation offering lower installation costs and maximum energy savings
ID : 130656
Brand : BELIMO
Model : EXT-TI-SBV2..
Last Update : 09/09/2559 15:16 Preview : 1,671
Static balancing valves, 2-way, with internal thread PN16 • For closed cold and hot water systems • For modulating water-side control of air handling units and heating systems
ID : 130657
Brand : BELIMO
Model : EXT-TI-SBV6..
Last Update : 09/09/2559 14:30 Preview : 1,402
Static balancing valves, 2-way, with PN16 • For closed cold and hot water systems • For modulating water-side control of air handling units and heating systems
ID : 131692
Model : LF..
Last Update : 29/09/2559 13:49 Preview : 1,382
Mechanical Fail-Safe Damper Actuator, 4Nm LF24(-S) 56 LF24-3 57 LF24-SR 58 LF230(-S)
ID : 133111
Brand : REGIN
Model : FLS304X
Last Update : 23/11/2559 16:04 Preview : 1,360
FLSX Liquid flow switch • Fits pipe sizes ranging from 1” to 8” • Available for use in seawater or corrosive media • Adjustable or fixed hysteresis FLS is a series of electro-mechanical flow switches for use in heating and cooling systems.
ID : 133322
Brand : REGIN
Model : RCF-230AD
Last Update : 18/02/2560 09:03 Preview : 2,490
RCF-230AD is a room controller intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint and fan speed are set using the buttons on the front.